Ads

Download Samsung Galaxy J1 SM-J100H Firmware


The J1 features a 4.3-inch WVGA display, 1.2GHz dual-core processor, a 5-megapixel rear camera, 2-megapixel front-facing camera, 4GB of expandable internal storage, a 1,850mAh battery, dual SIM support, and Android 4.4 KitKat with features like Ultra Power Saving Mode. There’s only 512MB of RAM on the phone,

Official Download Link

Direct Download Link 1


gsm-repairing-tricks cannot be held responsible if anything goes wrong. Users should proceed at their own risk.


Flashing requirements:

Odin Tool Download
Desired firmware package
Samsung device drivers Download

Flashing guide:

1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
     Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.

4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.